Skip to main content
 logo

Recherche

Search words under length of 3 characters are not processed.
178 résultats:
81. EV/VS, EV/VD
EV/VS, EV/VD

EV/VS and EV/VD flame arrester units provide manufacturers of vacuum pumps, blowers and compressors with a cost-effective protection for their machines. The high flow velocities in the small gaps of these machines can...

82. DZ/E
DZ/E

The PROTEGO® in-line valve DZ/E is a state-of-the-art pressure or vacuum relief valve with a right angle design. Typically, the valve is installed in the in-breathing or out-breathing lines of tanks, vesse...

83. VD/KSM-PA
VD/KSM-PA

The PROTEGO® valve VD/KSM-PA is a state-of-the-art pressure and vacuum relief valve with excellent flow performance made of high-grade synthetic material. Typically, the valve is installed in the in-breath...

84. BE/HK
BE/HK

For many years the PROTEGO® BE/HK end-of-line deflagration flame arrester has been successfully used to protect vessels and process engineering apparatus which are not pressurized. The device provides protection agai...

85. BR/TS-80-IIB3
BR/TS-80-IIB3

The PROTEGO® BR/TS-80-IIB3 detonation flame arrester was developed for protecting tankships but can also be used for containers. These devices are especially used on tank ships operating on inland waterway...

86. AL/DK
AL/DK

PROTEGO® lift-actuated vent valves type AL/DK provide automatic venting of floating roof tanks when the floating roof is lowered onto its supports and the tank is either drained or refilled. When the float...

87. UB/VF
UB/VF

The PROTEGO® UB/VF diaphragm valve is a worldwide unique vacuum relief valve combining the function of a dynamic and static flame arrester. It is primarily used as a device for flame transmission-proof in-...

88. D/SVL
D/SVL

The D/SVL type PROTEGO® valve is a high performance pressure relief valve. It is primarily used as a device for relieving pressure in tanks, containers, and process engineering equipment. The valve offers ...

89. FA-E-IIA1
FA-E-IIA1

The PROTEGO® FA-E-IIA1 series of in-line deflagration flame arresters is designed with an eccentric housing to automatically drain condensate build up in the housing. The PROTEGO® FA-E-IIA1 in-...

90. FA-I-PTFE
FA-I-PTFE

The in-line deflagration flame arresters type PROTEGO® FA-I-PTFE are the latest generation of flame arresters and are distinguished by their unique resistance to adhesive and corrosive media. The use of fl...

Search results 81 until 90 of 178